It doesn't just break large pieces into small ones, but turns "scrap" into "high-precision raw materials". The rotor-stator crusher, with a military-grade dual alloy knife shaft as the core, features a disassembleable grid sieve for the stator and a differential tearing technology for the rotor, achieving 3 alternating shearing cycles per minute, with a 42% increase in crushing strength and a 28% reduction in energy consumption. Motor shells, stator copper cladding, rotor aluminum end rings, rare earth permanent magnets... with a one-time separation rate of 98%, shiny copper wires without bending, intact aluminum rings without oxygen cutting, and magnets unaffected by high-temperature demagnetization, directly connecting to melting or remanufacturing processes, resulting in a tonnage revenue increase of 350,600 yuan. The entire machine operates with a sealed negative pressure, with dust levels of 5 mg/m³ and noise levels of 78 dB, passing the "Blue Standard" without the need for additional environmental protection equipment. The knife can be flipped on all eight sides, with a single set lasting 3,000 tons and requiring only 5 minutes to replace the knife, reducing downtime by 70%. Standard IoT modules provide dual cloud backups for current, temperature, and vibration data, allowing remote start/stop via mobile phone, automatic push notifications for fault codes, and 7-day advance warnings for maintenance, saving 200 man-hours annually. From waste motors to high-purity metals, it takes just 15 seconds; leave the complexity to the machines and keep the profits for yourself. The rotor-stator crusher—a "refinery" for recycled metals—is right in your workshop.