Still struggling with low recovery rates, expensive reagents, and large footprints in the re-election phase? The Rotating Spiral Chute solves three pain points with "one spiral": 1. Centrifugal and gravitational forces combined, capturing even 0.02 mm particles, with recovery rates over 30% higher than traditional chutes; 2. 360-degree rotating design continuously tumbles ore layers, automatically sorting out light impurities, and achieving a concentration ratio so high it's "visible to the naked eye," completing coarse, fine, and sweep selection in one machine; 3. No power or reagents needed, saving 70% on water and reducing site noise to 60 dB, cutting annual electricity and reagent costs equivalent to a Mercedes GLC. **Ultra-high recovery**: Recovery rates of 95% for heavy minerals like tungsten, tin, gold, and lead, with tailings grade halved. **Space-saving**: Diameter 1.2 m, footprint just 1.3 m2, yet processing capacity matches 4 x 6-S shaking tables. Installation requires only 2.5 m ceiling height. **Stable operation**: Fiberglass monolithic design with 5 mm wear-resistant layer, continuous operation for 18 months without maintenance, backed by 3-year warranty and lifelong technical support. **Jiangxi tungsten mine**: WO₃ grade in -0.074 mm fraction increased from 0.21% to 4.7%, with tailings reduced to 0.038%, yielding monthly profit of 3.2 million. **Guangxi gold mine**: Feed concentration 35%, throughput 8 t/h, gold recovery 98.2%, recouped costs in 40 days. **African copper-cobalt mine**: Original Cu 0.9%, Co 0.12%, with one-step coarse selection via Rotating Spiral Chute yielding Cu concentrate 18% Cu and Co concentrate 2.4%, sold directly on-site. Limited to 50 sets. Scan the QR code or click "Call: 13970779688" to get a tailored size-slope-speed solution from a technical engineer, turning your next batch of ore into profits in no time!